Recommended Copiers: Cannon 500, 550, 700, 800, Savin CS106, Kodak 1550, 150+, 1565, Ricoh NC 5006, 5106, 5206

Recommended Substrates: Cotton, Polyester, Poly / Cotton Blends, Fleece, Poly / Foam Hats

Items needed: Computer, Graphics Software, Color Laser Copier, SC Premium™ Color Laser Paper, Heat Press
Recommend Application for SC PREMIUM™ Transfer Paper
Application Instructions:

1) CREATE DESIGN - Using graphics software, create a design and output to your color laser printer. Fan sheets prior to loading. *Be sure to print your design in the REVERSE / MIRROR format.

2) TRIM TRANSFER - Trim the excess transfer paper away from the design before heat applying. *Trimming as close as possible will result in a cleaner, more precise finished product.

3) PREHEAT GARMENT - It is extremely important to preheat the garment before application. Press garment for 3-5 seconds to remove moisture and chemical treatment from the transfer area.

4) POSITION DESIGN - After preheating the garment, position the design face down onto the garment.

5) HEAT APPLY - Heat apply the design for 15 seconds at 375º F using HEAVY pressure. Peel away the backing immediately. PEEL HOT!

IMPORTANT:

* Please keep your SC Premium™ paper in the plastic bag until actual use. This will keep moisture out of the paper. Close the bag after each use.

*Before using, place paper in a zip-close bag with desi-pak and store flat in a cool, dry place for 24 hours. This will remove any moisture built up during shipping. Optimum humidity level of copier area and storage area for papers is 40%.

*Best performance is obtained on Cotton, Polyester and Poly / Cotton.		  
CARE INSTRUCTIONS:
** Turn garment inside out & machine wash in warm or cold water - mild detergent.
** Do not bleach.
** Tumble dry at a low setting.
** Do not iron directly over the design.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.