Recommended Printers: Inkjet Printers

Recommended Substrates: White and light color Cottons, Poly / Cotton Blends, Nylons and Lycra.

Items needed: Computer, Graphics Software, Inkjet Printer, Heat Press, Jetflex Transfer Paper
Recommend Application
Application Instructions:

1) CREATE DESIGN - Using graphics software, create a design and output it to an inkjet printer. *Be sure to print design in REVERSE / MIRROR format.

2) PREHEAT GARMENT - It is extremely important to preheat the garment before application. Press garment for 3-5 seconds to remove moisture and chemical treatment from the transfer area.

3) POSITION TRANSFER - After preheating the garment, position the cut transfer face down on the garment.

4) HEAT APPLY - Heat apply the design at a temperature of 375-400º F for 25-30 seconds using MEDIUM pressure. *PEEL HOT or COLD!

IMPORTANT: Please keep your Jetflex transfer paper in the plastic bag until actual use. This will keep moisture out of the paper. Close the bag after each use. 		 
CARE INSTRUCTIONS:
** Wash and dry according to fabric instructions.
** Do not use bleach.
** You can iron directly on the design

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.