Recommend Application for SPECTRA™ MEGAtallic™ - For Cottons, Polyester & Poly / Cotton blends
Application Instructions:

*Reminder, SPECTRA™ MEGAtallic™ designs must be cut in REVERSE.

1) PREHEAT - Preheat garment at a temperature of 302º F for 4 seconds to remove moisture and wrinkles.

2) APPLY - Apply SPECTRA™ MEGAtallic™ design to substrate for 10 - 15 seconds at a temperature of 302º F using MEDIUM pressure.

3) PEEL - After garment has completely cooled, remove mylar backing from SPECTRA™ MEGAtallic™ designs. PEEL COLD.

Roll Size: Width 15" x 5yd, 10yd, 25yd, & 50 yd. rolls 		 
CARE INSTRUCTIONS:
** Machine wash using mild detergent at 176º F max.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.