Recommend Application - For Lycra®, Elastan® spandex, cotton, poly, cotton/poly blends.
Application Instructions:

* SPECTRA™ Elasticut™ is a multilayer material, please pay close attention during cutting and weeding.*

1) CUT - Cut the design in REVERSE (mirror image).

2) WEED - Weed away the excess material until you get to
the adhesive polyester.

3) PREHEAT - Preheat garment for 3-5 seconds to
remove moister and wrinkles. Position the weeded
design on garment as desired.

IMPORTANT: For application onto non elastic fabrics,
only one step is neccessary. Apply for 15 seconds at
320º F with LIGHT pressure. PEEL WARM.

4) APPLY - (for elastic fabrics) Heat apply for 10 seconds
at 320º F with LIGHT pressure. Wait 5 seconds and
remove backing WARM.

5) COVER - (for elastic fabrics) Cover with Kraft paper and heat apply for another 10 seconds.

6) PEEL - (for elastic fabrics) After garment has completely cooled, remove cover sheet from SPECTRA™ Elasticut™.		  
CARE INSTRUCTIONS:
** Machine wash using mild detergent.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.