Recommend Application - For cottons, polyester & poly / cotton blends
Application Instructions:

*Reminder, SPECTRA™ CUT II team designs must be cut in REVERSE.

1) - Preheat garment at a temperature of 302º F for 4 seconds to remove moisture and wrinkles.

2) APPLY - Apply SPECTRA™ Cut II designs to substrate for 10 - 15 seconds at a temperature of 302º F using LIGHT pressure.

3) PEEL - After garment has completely cooled, remove mylar backing from SPECTRA™ Cut II. PEEL COLD!

4) - For a soft to the touch finish, COVER with Kraft Paper or teflon and heat apply again for 3-5 seconds.

2 COLOR APPLICATION
1) REPEAT - Repeat steps 1-3 above.

2) APPLY - Apply the second layer of SPECTRA™ Cut II for 10 seconds at 302º F using MEDIUM pressure.

3) PEEL - After the garment has completely cooled remove the mylar backing from SPECTRA™ Cut II. PEEL COLD!

4) APPLY - Apply the second layer of SPECTRA™ Cut II for 6-8 seconds at 302º F using MEDIUM pressure.

5) PEEL - After the garment has completely cooled remove the mylar backing from SPECTRA™ Cut II. PEEL COLD!

6) COVER - Cover both layers with either Kraft paper or Teflon and heat apply again for 6-8 seconds using the same temperature and pressure. PEEL HOT!
 
CARE INSTRUCTIONS:
** Machine wash using mild detergent at 176º F max.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.