Recommended Printers: Color Laser Copiers • Cannon 300, 320, 350, 500, 550, 700, 800 • SAVIN CS106 • Kodak 1525, 1550 • Ricoh NC 5006 .

Items needed: Computer, Graphics Software, Color Laser Copier, Universal™ Transfer Paper, Heat Press
Recommend Application
Application Instructions:

1) HEAT APPLY - Tack felt to garment before sewing. Heat apply at 350º F for 10 seconds using Firm pressure (apply for 20 seconds if not sewing).

2) SEW - To secure felt permanently, it must be sewn.


IMPORTANT:

**PERMANENT ADHESION IS NOT GUARANTEED WITHOUT SEWING.** The adhesive used on our Felt is a non-permanent, tack-only adhesive. The Felt should be sewn (usually with a straight stitch) after heat application. A number of our customers choose to heat apply Felt and not sew. If that method is used, there is NO guarantee regarding PERMANENT adhesion. Also, because wool Felt is a non-woven, it will "distress" or wear in its own unique way with time and washing. 		 
CARE INSTRUCTIONS:
** Wash using warm water only(under 110°) and mild detergent
** Do not bleach.
** Dry at normal dryer settings.
** Can be ironed
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.